stk11xx: isoc_init() submit_urb 10 failed with error -90 stk11xx: isoc_init() submit_urb 9 failed with error -90 stk11xx: isoc_init() submit_urb 8 failed with error -90 stk11xx: isoc_init() submit_urb 7 failed with error -90 stk11xx: isoc_init() submit_urb 6 failed with error -90 stk11xx: isoc_init() submit_urb 5 failed with error -90 stk11xx: isoc_init() submit_urb 4 failed with error -90 stk11xx: isoc_init() submit_urb 3 failed with error -90 stk11xx: isoc_init() submit_urb 2 failed with error -90 stk11xx: isoc_init() submit_urb 1 failed with error -90 stk11xx: isoc_init() submit_urb 0 failed with error -90 stk11xx: v1.2.0 : Syntek USB Video Camera usbcore: registered new interface driver usb_stk11xx_driver stk11xx: Syntek USB2.0 Camera is now controlling video device /dev/video0 stk11xx: Load default sensor settings fail ! stk11xx: Check device return error (0x0201 = 0C) ! stk11xx: Check device return error (0x0201 = 0D) ! stk11xx: Initialize USB2.0 Syntek Camera build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/core/message.c: selecting invalid altsetting 5 stk11xx: Syntek Eas圜AP USB2.0 - Product ID 0x0408. stk11xx: Syntek USB2.0 - STK-1160 based capture device found. stk11xx: Syntek USB2.0 webcam driver startup On modprobe it always fails in dev_stk11xx_camera_on(). I've added the device ID etc, and tried all combinations of webcam_model. There are lots of them for sale, so I expect more people will try your driver. Hello, I have a cheap USB video capture device from eBay containing an stk1160, which I hope to get working with the stk11xx driver under Linux (which I've pulled out of SVN).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |